Basket
0
Items
0
Subtotal
Tuscan Foundry Products Ltd
Freephone (UK): 0800 174093      Telephone: 01409 255120
Page not found
Sorry there has been a problem with the page you requested.
LR10 : LR10 570 x 1138
Clear Viewable (mm)   
(w) x (h) 570 x 1138 
 
Overall Size (mm)   
(w) x (h) 820 x 1430 
 
Internal Rafter  (mm)   
(w) x (h) 640 x 1198 

Important Notice:

This is a British manufactured low profile conservation rooflight. The double glazed units are argon gas filled and include Pilkington Activ self-clean, solar control glass. The units are separated by a genuine, and not stuck on, glazing bar. The American ash interior liner is hand produced locally and lightly coated with Danish oil. The brass winding mechanisms are also British manufactured to ensure consistent high quality and long life.

The Lumen range of Conservation rooflights are easy and quick to fit, without the need to build a complicated internal framework to get them to sit flush. We also offer real lead flashing kits that are designed to last for decades and speed up the fitting process; all of which ultimately reduces your installation cost.

We are able to supply fixed shut/fixed casement conservation rooflights from the stock range of sizes. To do this we take one of the normal opening sizes and screw/silicone the lid to the framework giving a permanently fixed casement. In addition we normally remove part of the manual handle plate so that it does not stick into the room. The handle plate is cut flush with the edge of the internal lining. This leaves a small black plate on the bottom edge of the liner but allows us to fix the liner to the rooflight. If you would like the entire plate removed, we have to manufacture a bespoke item. Please contact our sales team on 0330 300 1090 for prices and delivery times. Please note that we are not able to accept returns of products that have been adapted to customer requirements. This includes bespoke and fixed rooflights.
LR10 570 x 1138
B650L : B6-50L
Height:468mm Depth:221mm Width: 60mm Output Watts: 131 Output BTU's: 447
H16SE : H16 Stop End
Stop end for H16 moulded gutterH16 Stop End
BWM1.5M : Brass Crank Pole 1.5m to 2.8m
The pole winding mechanism for opening and closing the rooflights. To be used with our Lumen rooflight mechanism.
MS4052 : Blank End Drilled and Tapped [MS]
This cast iron soil range is a mechanically jointed, socketless system, especially suited for refurbishment projects including apartments, offices and multi-storey car parks.Blank End Drilled and Tapped [MS]
COGCLIP : Common OG Gutter Union-Clip
A genuine cast iron rainwater system with the traditional ogee (OG) curved pattern.

Please use the drop menu above to select your size and finish. Items are available in both grey primer of pre-painted black finish.

Cast iron gutters and pipes offer great strength and durability, a proven history of long life, low noise operation and fire resistance. Most old buildings have cast iron rainwater systems that should be maintained and preserved however; these inherent benefits make a cast iron rainwater system an ideal choice for both traditional and modern installations.
Common OG Gutter Union-Clip
LR05 : LR05 724 x 877
Clear Viewable (mm)   
(w) x (h) 724 x 877 
 
Overall Size (mm)   
(w) x (h) 974 x 1169 
 
Internal Rafter  (mm)   
(w) x (h) 794 x 937 

Important Notice:

This is a British manufactured low profile conservation rooflight. The double glazed units are argon gas filled and include Pilkington Activ self-clean, solar control glass. The units are separated by a genuine, and not stuck on, glazing bar. The American ash interior liner is hand produced locally and lightly coated with Danish oil. The brass winding mechanisms are also British manufactured to ensure consistent high quality and long life.

The Lumen range of Conservation rooflights are easy and quick to fit, without the need to build a complicated internal framework to get them to sit flush. We also offer real lead flashing kits that are designed to last for decades and speed up the fitting process; all of which ultimately reduces your installation cost.

We are able to supply fixed shut/fixed casement conservation rooflights from the stock range of sizes. To do this we take one of the normal opening sizes and screw/silicone the lid to the framework giving a permanently fixed casement. In addition we normally remove part of the manual handle plate so that it does not stick into the room. The handle plate is cut flush with the edge of the internal lining. This leaves a small black plate on the bottom edge of the liner but allows us to fix the liner to the rooflight. If you would like the entire plate removed, we have to manufacture a bespoke item. Please contact our sales team on 0330 300 1090 for prices and delivery times. Please note that we are not able to accept returns of products that have been adapted to customer requirements. This includes bespoke and fixed rooflights.
LR05 724 x 877
VL012 : Designer Valves & Elements VL012
Straight Thermostatic: No Pair
IN014 : Interiors Range 014
Dramatically different, surprisingly versatile, with almost limitless possibilities, a fresh concept for every environment, like no other the interiors collection is made for conversation
Freephone (UK): 0800 174093 Telephone: 01409 255120 | 01409 255120
Tuscan Foundry Products Ltd, RMD2, Holsworthy Industrial Estate, Holsworthy, Devon, EX22 6HL, United Kingdom
Fax: 0845 345 0215 Email: info@tuscanfoundry.co.uk