Victorian cast iron radiators are traditional column cast iron radiators the ideal choice for Victorian and older style properties. Cast radiators add a touch of period authenticity and comfort that only genuine cast iron antique radiators can provide.

Please note that casting is not an exact science and during the manufacturing process slight variations and imperfections can occur. In the case of cast iron radiators the manufacturing process can leave edges feeling rough.
FirstPreviousNextLast   Showing    Of : 6


Code: KENTWELL
Kentwell Themostatic Valve Set
Description
Technical
Related
Download
High quality thermostatic brass valve and lockshield set

Available in standard angle connections for 1/2" (15mm) connections to copper pipe

Supplied in brass or chrome plated finish.

Please note that as all radiator valves are custom made we are unable to accept returns unless the item is damaged in transit or faulty.
Thermostatic valves are bi-directional. Operating temperature range approximately 5-30 degrees centigrade.
Turn handwheel clockwise to decrease the temperature and vice versa.
Normal room temperatures are achieved with between 1 or 2 black rings being exposed on the valve stem. Complete clockwise rotation of the handwheel will give full mechanical shutdown of the valve, overriding the thermostatic mechanism. Heating systems with thermostatic radiator valves must be fitted with relevant differential by-pass valves.

Test Pressure: 7 bar/100 psi - manual and thermostatic. Differential pressure: 0.6

Unwrap valves, preventing damage by laying them on the tissue paper in which they were wrapped. Apply sealing tape or sealant to the thread of the radiator connector. Tighten the connector into the radiator using a 12mm. hexagon key. Ensure that the rubber ‘o’ ring is in place on the connector before re-attaching the valve body.

After installation clean the valves with a soft cloth.

ALWAYS when tightening or unscrewing incoming pipework, use a spanner fitted to the inlet adaptor hexagon – Damage to the valve could result if these instructions are not followed.
To prevent damage to the valve nuts, cut strips of cardboard from the packaging and wrap around the nuts before applying a spanner to them.

No information available
No information available


Code: V4-35
4 Columnn Cast Iron Radiator (353mm h V4-35)
Description
Technical
Related
Download
The Tuscan cast iron radiator is supplied in white primer as standard but is also available in a selection of colours. Available pre-assembled up to 20 sections ready for installation. Supplied as a floor standing version with integrated feet as standard. The radiator is supplied with 1/2 connections.

Made from quality cast iron our forged radiator delivers heat through out the house. The cast iron radiator combines classic authentic styling with modern reliability and comfort.

Mounting Options

The radiator is supplied as standard with feet and all fixings and ties included in the price. Should you require the wall mounted only version this must be stated when ordering. Valves are not included and must be purchased with the radiator if required.
Feet Positions
Up to 20 Sections: 2 feet one at each end
Odd numbers (21-39 Sections): 3 feet one at each end and one centrally
Even numbers (22-40 Sections): 4 feet one at each end and 2 evenly spaced
No. brackets with wall mounted option:
Up to 17 sections: 4 Brackets
18 - 31 sections: 6 Brackets
32 - 40 sections: 8 Brackets
Height - with foot H1: 353
Height - without foot H2: 288
Centres C: 102 or 112
Section width W: 50
Depth D: 140
Water volume per section Lit: 0.40
Dry weight per section kg: 2.58
Output EN442 - 50° Watts: 40.8
Max delivered assembled lengths: 20
No information available


Code: V4-48
4 Column Cast Iron Radiator (485mm h V4-48)
Description
Technical
Related
Download
The Tuscan cast iron radiator is supplied in white primer as standard but is also available in a selection of colours. Available pre-assembled up to 20 sections ready for installation. Supplied as a floor standing version with integrated feet as standard. The radiator is supplied with 1/2 connections.

Made from quality cast iron our forged radiator delivers heat through out the house. The cast iron radiator combines classic authentic styling with modern reliability and comfort.

Mounting Options

The radiator is supplied as standard with feet and all fixings and ties included in the price. Should you require the wall mounted only version this must be stated when ordering. Valves are not included and must be purchased with the radiator if required.
Feet Positions
Up to 20 Sections: 2 feet one at each end
Odd numbers (21-39 Sections): 3 feet one at each end and one centrally
Even numbers (22-40 Sections): 4 feet one at each end and 2 evenly spaced
No. brackets with wall mounted option:
Up to 17 sections: 4 Brackets
18 - 31 sections: 6 Brackets
32 - 40 sections: 8 Brackets
Height - with foot H1: 485
Height - without foot H2: 420
Centres C: 102 or 112
Section width W: 50
Depth D: 140
Water volume per section Lit: 0.49
Dry weight per section kg: 3.19
Output EN442 - 50° Watts: 58.2
Max delivered assembled lengths: 20
No information available


Code: V4-63
4 Column Cast Iron Radiator (636mm h V4-63)
Description
Technical
Related
Download
The Tuscan cast iron radiator is supplied in white primer as standard but is also available in a selection of colours. Available pre-assembled up to 20 sections ready for installation. Supplied as a floor standing version with integrated feet as standard. The radiator is supplied with 1/2 connections.

Made from quality cast iron our forged radiator delivers heat through out the house. The cast iron radiator combines classic authentic styling with modern reliability and comfort.

Mounting Options

The radiator is supplied as standard with feet and all fixings and ties included in the price. Should you require the wall mounted only version this must be stated when ordering. Valves are not included and must be purchased with the radiator if required.
Feet Positions
Up to 20 Sections: 2 feet one at each end
Odd numbers (21-39 Sections): 3 feet one at each end and one centrally
Even numbers (22-40 Sections): 4 feet one at each end and 2 evenly spaced
No. brackets with wall mounted option:
Up to 17 sections: 4 Brackets
18 - 31 sections: 6 Brackets
32 - 40 sections: 8 Brackets
Height - with foot H1: 636
Height - without foot H2: 570
Centres C: 102mm or 112mm
Section width W: 50
Depth D: 140
Water volume per section Lit: 0.60
Dry weight per section kg: 4.19
Output EN442 - 50° Watts: 75.4
Max delivered assembled lengths: 17
No information available


Code: V4-78
4 Column Cast Iron Radiator (785mm h V4-78)
Description
Technical
Related
Download
The Tuscan cast iron radiator is supplied in white primer as standard but is also available in a selection of colours. Available pre-assembled up to 20 sections ready for installation. Supplied as a floor standing version with integrated feet as standard. The radiator is supplied with 1/2 connections.

Made from quality cast iron our forged radiator delivers heat through out the house. The cast iron radiator combines classic authentic styling with modern reliability and comfort.

Mounting Options

The radiator is supplied as standard with feet and all fixings and ties included in the price. Should you require the wall mounted only version this must be stated when ordering. Valves are not included and must be purchased with the radiator if required.
Feet Positions
Up to 20 Sections: 2 feet one at each end
Odd numbers (21-39 Sections): 3 feet one at each end and one centrally
Even numbers (22-40 Sections): 4 feet one at each end and 2 evenly spaced
No. brackets with wall mounted option:
Up to 17 sections: 4 Brackets
18 - 31 sections: 6 Brackets
32 - 40 sections: 8 Brackets
Height - with foot H1: 785
Height - without foot H2: 720
Centres C: 102mm or 112mm
Section width W: 55
Depth D: 140
Water volume per section Lit: 0.85
Dry weight per section kg: 5.17
Output EN442 - 50° Watts: 98.3
Max delivered assembled lengths: 17
No information available


Code: V4-93
4 Column Cast Iron Radiator (935mm h V4-93)
Description
Technical
Related
Download
The Tuscan cast iron radiator is supplied in white primer as standard but is also available in a selection of colours. Available pre-assembled up to 20 sections ready for installation. Supplied as a floor standing version with integrated feet as standard. The radiator is supplied with 1/2 connections.

Made from quality cast iron our forged radiator delivers heat through out the house. The cast iron radiator combines classic authentic styling with modern reliability and comfort.

Mounting Options

The radiator is supplied as standard with feet and all fixings and ties included in the price. Should you require the wall mounted only version this must be stated when ordering. Valves are not included and must be purchased with the radiator if required.
Feet Positions
Up to 20 Sections: 2 feet one at each end
Odd numbers (21-39 Sections): 3 feet one at each end and one centrally
Even numbers (22-40 Sections): 4 feet one at each end and 2 evenly spaced
No. brackets with wall mounted option:
Up to 17 sections: 4 Brackets
18 - 31 sections: 6 Brackets
32 - 40 sections: 8 Brackets
Height - with foot H1: 935
Height - without foot H2: 870
Centres C: 102mm or 112mm
Section width W: 55
Depth D: 140
Water volume per section Lit: 0.97
Dry weight per section kg: 6.54
Output EN442 - 50° Watts: 116.4
Max delivered assembled lengths: 17
No information available
Victorian traditional central heating radiators are the ideal choice for Victorian and older style properties. Adding a touch of period authenticity and comfort that only genuine cast iron can provide.

Replicated from a 19th century pattern and reminiscent of radiators installed during the Victorian and Edwardian periods.

The sectional column concept enables Victorian radiators to be assembled to meet your individual requirements.

The versatility offered by this individual section system means that there will be a Victorian radiator to suit virtually every normal household application.

Tuscan traditional radiators forged from cast iron.

Length

Overall length equal to number of sections x 60mm plus 26mm (for reducing bushes)
Example 20 Section Radiator: 20 x 60mm + 26mm =1226mm Total length

Mounting Options

The radiator is supplied as standard with feet and all fixings and ties included in the price. Should you require the wall mounted only version this must be stated when ordering. Valves are not included and must be purchased with the radiator if required.

Feet Positions

Up to 20 Sections: 2 feet one at each end
Odd numbers (21-39 Sections): 3 feet one at each end and one centrally
Even numbers (22-40 Sections): 4 feet one at each end and 2 evenly spaced

No. brackets with wall mounted option:

Up to 17 sections: 4 Brackets
18 - 31 sections: 6 Brackets
32 - 40 sections: 8 Brackets


The Victorian range is supplied in a primer finish. Coloured finishes, to your requirements, are easily achieved by using a commercially available spray paint.

Please note that casting is not an exact science and during the manufacturing process slight variations and imperfections can occur. In the case of cast iron radiators the manufacturing process can leave some of the edges feeling rough. It is quite often this rough texture and appearance that makes the cast iron radiator such a period feature.

Radiators in a primer finish have a 7 working day delivery time and painted orders are available in 15 working days.
 
Freephone (UK): Telephone: 0333 987 4452
Tuscan Foundry Products Ltd, Unit 1, Dunsdon Farm Estate, Pancrasweek, Holsworthy, Devon, EX22 7JW, United Kingdom
Fax: Email: info@tuscanfoundry.co.uk